Scaffolds (Staging)
» Independent Pole Metal Scaffolds
An independent pole metal scaffold is a supported scaffold consisting of a platform(s) resting on cross beams (bearers) supported by ledgers and uprights independent of support (except ties, guys, braces) from any structure.
Before reviewing this section, refer to the
General Scaffolding Requirements
.
Requirements and Example Solutions
Figure 1: Independent metal pole scaffolding.
Scaffold members must be maintained in good repair and free of corrosion. [
29 CFR 1915.71(d)(1)
]
Vertical and horizontal members must be fastened together with a coupler or locking device. [
29 CFR 1915.71(d)(2)
]
Posts must be kept plumb and rest on an adequate foundation and adequately braced. [
29 CFR 1915.71(d)(3)
and
(d)(4)
]
Bearers must be level and installed at each working platform. [
29 CFR 1915.71(d)(5)
]
Tubular bracing must be applied where required. [
29 CFR 1915.71(d)(6)
]
Back to Top
