Variances in Effect & Interim Orders
Construction
This table is best viewed on tablets, notebooks, or desktop computer screens.
| Number | Grantee | Effective Date | Standard(s) | Variance Type | Federal Register Reference | Effective Locations (States) | Brief Description |
|---|---|---|---|---|---|---|---|
| Kiewit Power Constructors Co. et al.; (Avalotis Corp.; Bowen Engineering Corporation (merged with Mid-Atlantic Boiler & Chimney, Inc. (formerly Alberici Mid-Atlantic, LLC)); Commonwealth Dynamics, Inc.; Gibraltar Chimney International, LLC; Hamon Custodis, Inc. (formerly Custodis Construction Co., Inc., then Custodis Cuttrell, Inc.); Hoffmann, Inc.; Industrial Access, Inc; International Chimney Corporation; Karrena International Chimney; Kiewit Power Constructors Co.; Marietta Silos, LLC; Matrix SME, Inc. (formerly Matrix Service Industrial Contractors, Inc.); NAES Power Contractors (formerly American Boiler and Chimney Company); Pullman Power, LLC (formerly M. W. Kellogg Co., then Pullman Power Products Corporation); R and P Industrial Chimney Co., Inc.; T.E. Ibberson; & TIC-The Industrial Company) | 28-Sep-2013 | 1926.452 (o)(3); 1926.552 (c)(1) through (c)(4), (c)(8), (c)(13), (c)(14)(i), and (c)(16) | Permanent | OSHA-2012-0015 | All Fed OSHA States Plus: AK, AZ, IN, MD, MN, NV, NM, NC, OR, PR, TN, VA, VT, WY | Allows employers to use a rope-guided hoist system during inside or outside chimney construction to raise or lower workers between the bottom landing of a chimney and an elevated work location on the inside or outside surface of the chimney using personnel cages, personnel platforms, and boatswain's chairs. | |
| Salini-Impregilo Healy Joint Venture Northeast Boundary Tunnel Project | 11-May-2020 | 1926.803(f)(1); 1926.803(g)(1)(iii); and 1926.803(g)(1)(xvii) | Permanent | OSHA-2018-0013 | DC | Allows employers to use alternate means of protection from the provisions of OSHA standards that regulate work in compressed-air environments. | |
| Ballard Marine Construction | 21-January-2021 | 1926.803(f)(1); 1926.803(g)(1)(iii); and 1926.803(g)(1)(xvii) | Permanent | OSHA-2019-0008 | NY | Allows employers to use alternate means of protection from the provisions of OSHA standards that regulate work in compressed-air environments. |
General Industry
| Number | Grantee | Effective Date | Standard(s) | Variance Type | Federal Register Reference | Effective Locations (States) | Brief Description |
|---|---|---|---|---|---|---|---|
|
10-Mar-1978 | 1910.106(d)(5)(vi)(b) | Permanent | 43:9887-88, 3/10/78 | SD, MO, TX | Allows employer to store flammable and combustible liquids on racks to the heights and under conditions specified in the order. | |
|
4-Oct-1977 | 1910.22(c); 1910.23(c)(3) | Permanent | 42:54028, 10/4/77 | OH | Allows employer to continue its operation using galvanizing tank having ledges 31 1/2" wide and sides 30" high in lieu of guardrail and toeboard required by standards, provided special conditions specified are followed. | |
|
14-Oct-1977 | 1910.22(c); 1910.23(c)(3) | Permanent | 42:55291, 10/14/77 | NY | Allows employer to continue its operation using galvanizing tank having ledges (including the protective angle) 24" wide and sides 30" high in lieu of guardrail and toeboard required by standards, provided special conditions specified are followed. | |
|
5-Aug-2020 | 1910.147(d)(3) | Interim Order | OSHA-2019-0004 | WV | Allows employer to use a modified lockout/tagout system for laser cutting cell. | |
|
13-Oct-2010 | 1910.1025(h)(2)(i); 1910.1018(k)(2) | Grant of Permanent Variance | OSHA-2010-0011 | IL | Allows employer to use compressed air to clean floors and other surfaces where lead and arsenic particulates accumulate. | |
|
28-Dec-1976 | 1910.22(c); 1910.23(c)(3) | Permanent | 41:56410-11, 12/28/76 | Atlanta, GA | Allows employer to continue operations while using its galvanizing tank having sides 30" high and ledges 32" wide in lieu of guardrail and toeboard required by standards, provided special conditions specified in the order are followed. | |
|
4-Aug-2015 | 1915.116(i), (j) & (q) | Permanent | 81 FR 51499, 8/4/2016 | VA | Allows employer to work under a suspended load during modular ship construction and structural repair provided special conditions specified within the order are followed. | |
|
8-April-2016 | 1910.147(c)(4)(i) |
|
81 FR 20680, 4/8/16 | CT |
|
|
| Jardon and Howard Technologies, Incorporated | 15-May-2019 | 1910.330(d)(3),(d)(4); 1910.423(b)(2), (c)(1), (c)(3); 1910.424(b)(2) | Permanent | 84 FR 21822, 5/15/19 | NC, SC | Allows employer to conduct diving in accordance the NOAA Diving Program (NDP), as well as use Buoyancy Compensator Devices (BCDs) in accordance with NOAA Alternative Diving Standards previously approved by OSHA. | |
| STP Nuclear | 1-Sep-2020 | 1910.146(b) | Interim Order | OSHA-2020-0001 | TX | Allows employer to use a modified energy isolation system to perform condenser water box maintenance activities. |